Cadillac ATS-V tagged posts

More News on the 7.0L V8 Cadillac ATS-V+

Two days ago we have reported that Cadillac is going to put the 7.0L V8 engine in the ATS-V+, and mates it to either a 8-speed automatic transmission or a 7-speed manual transmission.

2016_Cadillac_ATS-V_Front

Today we got an update that, although the GM 8L90 8-speed automatic transmission will make its way to the ATS-V+, the 7-speed manual one is unlikely to be seen on the ATS-V+.

The major reason is cost: the Tremec TR-6070 7MT currently used on the C7 Corvette, is designed for the rear-placement layout (the Corvette’s transmission is placed near the rear axle, NOT bolted to the engine like other FR-layout cars)...

Read More

Cadillac Working on ATS-V+, Possibly Using 7.0L V8

We have received some tips from our friend who is working in GM, that Cadillac is planning a higher performance version of the already-high-performance ATS-V, named the “ATS-V+”.

2016_Cadillac_ATS-V_LAShow_5

The first question to be asked must be: what engine? There are multiple choices within GM’s parts bin. If you have noticed the engine compartment of the ATS-V (shown below), you will see it is more than enough to accommodate a V8, since the 3.6L twi-turbo V6 engine is sitting almost 100% behind the front wheel axle.

2016_Cadillac_ATS-V_LAShow_6

In fact, our insider told us Cadillac is currently serious considering bringing the firm’s LS7 7.0L V8 in the ATS-V+. The 7...

Read More

2016 Cadillac ATS-V Comes with More Power, Reaching 464HP

We have been extensively covered the 2016 Cadillac ATS-V since last May, 2014. For our previous reports about the ATS-V, please see here. Originally Cadillac said the ATS-V’s 3.6L twin-turbo V6 engine is capable of 455hp and 445 lb-ft of torque, 0-60mph only needs 3.9 seconds, with top speed 189mph.

2016_Cadillac_ATS-V_LAShow_5

Today Cadillac announced that the final output spec of the ATS-V will be higher than the original estimate, now SAE-certified at 464hp and 444 lb-ft of torque. 0-60 time is reduced to 3.8 seconds.

Please note: if you read Cadillac’s previous press release, it mentions for the ATS-V there is “structural stiffness increased by 25 percent”. Please do not be confused about this...

Read More

2016 Cadillac ATS-V Pricing Released

We have been talking about the Cadillac ATS-V since last May, and you can see all of our previous coverage here.

Since our last interview with Mr. David Leone, Cadillac’s Executive Chief Engineer, Cadillac has been quiet on further information regarding the BMW M3/M4 fighter. But today, GM finally released one of the most important number we are expecting: the price.

2016_Cadillac_ATS-V_LAShow_5

The 2016 ATS-V sedan starts at MSRP $61,460, and the ATS-V coupe starts at $63,660. The ATS-V sedan is a couple hundred dollar cheaper than the BMW M3 ($62,000), and it is the same for the ATS-V coupe too (compared with BMW M4’s $64,200)...

Read More

LA Auto Show: The 2016 Cadillac ATS-V Sedan and Coupe

The All New 2016 ATS-V At The LA Auto Show

Today at the 2014 LA auto show, Cadillac officially released the 2016 ATS-V, in both coupe and the sedan.

2016_Cadillac_ATS-V_LAShow_3

We’ll go over some highlights in the official press release later. But first we want to share our interview with Mr. David Leone, Cadillac’s Executive Chief Engineer.

2016_Cadillac_ATS-V_LAShow_5

YouWheel.com’s Interview With Cadillac’s Executive Chief Engineer

1. For the “structural stiffness increased by 25 percent” mentioned in the press release, the most accurate message is: it is actually the front section of the car (body structure in front of the firewall) increased by 25 percent. The whole body’s torsional stiffness, according to Mr...

Read More